TPO is a thermoplastic polyolefin (TPO) waterproof membrane made of TPO resin (Hifax) by chemical copolymerization with the stabilizers. It is internally reinforced with fabric mesh for mechanically fixed roofing systems. It is a white membrane and helps to reflect heat instead of absorbing it. It is one of the best modern materials used for roof waterproofing.

Bostik Powerproof PU-D is a single-component, ready-to-use, solvent-free, permanent and highly elastic waterproofing membrane. Once cured, it provides a tough membrane able to withstand a continuous cycle of weathering and prevents water leakage.

Bostik Boscolastic is a two-component flexible cementitious waterproofing that is mixed on site and other construction materials. Boscolastic has an excellent weathering resistance and crack bridging property.

Boscocem Slurry is a cement-based two-component

acrylic reactive polymer modified waterproofed coating.

Boscocem Slurry is highly effective for positive side

waterproofing.

Bostik Powermix is a flexible, fibre-reinforced and specially modified high-grade acrylic polymer that is mixed with Portland Cement to provide superior water protection and more to concrete surfaces.

Torch-on is a fully bonded torch-on applied waterproofing membrane consisting of visco-elastic resins and inert filler, reinforced with spunbond polyester carrier.

Bostik Powerseal is polymer modified that creates low maintenance and highly durable waterproof barrier. It protects concrete against carbonation and attack from pollutants.

Bostik Powerplug Fast Setting Hydraulic Cement-based, quickset, hydraulic cement that immediately obstructs streaming water of moisture leakage from holes or cracks in concrete and masonry walls.

Bostik Boscoseal PU is a one-part ready to use coal tar free bitumen modified, moisture curing polyurethane membrane. After curing it provides a tough highly elastomeric, impervious barrier to moisture.

Bostik Powerfix is a styrene-acrylic admixture that provides strength to adhesives to bond substrates without much hassle since it also improves its flexural and compressive components.

Bostik Seal N' Flex One Plus P590 is a low modulus, bubble-free curing, universal polyurethane sealant for construction and expansion joints. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of +100%/- 50% of the original installed joint width.

𝗢𝗣𝗧𝗜𝗠𝗔𝗦𝗧𝗜𝗖 𝗣𝗨-𝗦 (𝘭𝘰𝘸 𝘔𝘰𝘥𝘶𝘭𝘶𝘴 𝘊𝘰𝘯𝘴𝘵𝘳𝘶𝘤𝘵𝘪𝘰𝘯 𝘑𝘰𝘪𝘯𝘵 𝘚𝘦𝘢𝘭𝘢𝘯𝘵) is a moisture curable modified polyurethane sealant that is non-sag and high movement resistant. Suitable for sealing joint of underground tunnel, bridge tunnel, drains, sewages pipe, epoxy floor, concrete internal walls and various holes in walls and floors lab.

𝐒𝐄𝐀𝐋𝐁𝐎𝐍𝐃 𝐄𝐅𝐂-𝟏𝟎𝟎 Epoxy Flooring Compound! The number one protective coating you can rely on. Makes your flooring durable while giving it an aesthetically good look!  Available in any color based on your request.

Bostik No More Nails is a versatile general purpose construction adhesive suitable for bonding a wide variety of building materials. Its superb bond strength is ideal for demanding situations.

𝐒𝐄𝐀𝐋𝐁𝐎𝐍𝐃 𝐄𝐅𝐂-𝟏𝟎𝟎 Epoxy Flooring Compound! The number one protective coating you can rely on. Makes your flooring durable while giving it an aesthetically good look!  Available in any color based on your request.

Bondflex EWB Elastomeric Waterproofing Paint is a high performance UV resistant water based coating formulated based on 100% AcryliC Emulsion for use as waterproofing paint on walls and roofs. Highly recommended for the waterproofing of roof deck, concrete gutters, toilet and bath, G.I. Roofing and Roof tiles and as protective coating for Polyurethane Foams

SEALBOND PRESSURE INJECTION EPOXY (218P) is a two component adhesive system composed of 100% solids Epoxy primarily designed for the all around remedy of structural concrete defects and flaws particularly the repair of cracks by epoxy injection. It can also be combined with fine aggregates or silica sand to result in an Epoxy Mortar for high strength grouting.

SEALBOND EPOXY FLOORING SELFLEVELING (EFC-80)

is a two-component epoxy. It cures to a hard coating surface that is abrasion resistant. SEALBOND EFC-80 is water-impermeable and has excellent resistance to oil, solvents, alkalis and most dilute acids.